Hydraulic home elevator
ES HYDRAA
Hydraulic, smooth & entry-friendly.
An oil-cushioned hydraulic home elevator engineered for low-rise villas and townhomes. The ride is famously smooth, the machine is famously simple — and the entry price sits below every gearless model in the ESA family.
- 320 kg4 passengers
- 0.20 m/stravel speed
- 150 mmpit depth
- 5max stops
ES HYDRAA · hydraulic
02▲
Key features
Why pick the hydraulic.
Oil cylinder, low rise, smooth travel — the most forgiving home elevator architecture in the lineup.
-
Oil-cushioned ride
A piston driven by a sealed oil cylinder lifts the cabin from below. The travel is famously smooth — no rope hum, no belt rattle.
-
Entry-friendly price
Fewer parts, a simpler control board and a smaller motor mean ES HYDRAA sits below every gearless model on price — without giving up cabin finish.
-
150 mm pit · light structure
Drops into existing villas with minimal civil work. The structure is lighter than a gearless rope drive, which makes ES HYDRAA the easiest of all our cabins to retro-fit.
-
Single-phase 230 V
Runs on a regular domestic supply. No three-phase board, no special wiring, no surprises on the meter.
-
Decades of service life
Hydraulic systems are the most proven elevator architecture in the world — fewer moving parts, predictable wear and an enormous service network. Built to outlive its house.
-
Full safety stack
ARD, dual UPS, anti-squeeze doors, SOS line, fire-mode response and overload sensing — the same eight-layer ESA stack as the rest of the family.
Specifications
Engineered to spec.
| Capacity | 320 kg / 4 passengers |
|---|---|
| Travel speed | 0.20 m/s (option to 0.30 m/s) |
| Drive | Hydraulic piston · sealed oil cylinder |
| Power supply | Single-phase 230 V · 50 Hz |
| Cabin noise | < 55 dB at full travel |
| Pit depth | From 150 mm |
| Headroom | From 2400 mm |
| Travel | Up to 15 m |
| Stops | Up to 5 |
| Door type | Automatic centre-opening · glass or panel |
| Finish | Brushed copper · rose-gold · stainless · walnut |
| Controller | Microprocessor · IoT module |
| Compliance | EN 81-41 · IS 14665 |
| Warranty | Up to 5 years (extended plan) |
Make it yours
Configure the cabin.
Six standard finishes. Custom trim and lighting on request.
Rose-gold
Warm metal with a satin clear-coat.
Brushed copper
Hand-brushed, develops a soft patina.
Stainless steel
Brushed 304-grade, fingerprint-resistant.
Walnut veneer
Real wood lining, leather handrail.
Warm champagne
Soft gold tone, smoked-glass option.
Matte black
Powder-coated frame, glass shaft.
Where it fits
Built for villas.
ES HYDRAA is the easiest, smoothest, most forgiving way to add a lift to a low-rise home.
- 01
Two- to four-storey villas
Smooth, oil-cushioned travel for the everyday home.
- 02
Retro-fit projects
Light structural load and 150 mm pit make it the easiest add-on to an existing house.
- 03
Compact townhomes
Slim shaft, single-phase power, and a small machine cabinet — fits where a gearless rope drive can't.
- 04
Older houses
Predictable architecture and decades of proven service make ES HYDRAA the safe bet for legacy buildings.
Ready when you are
Bring ES HYDRAA home.
Free site survey · fixed-price quote in seven days · install times start at four weeks.
Also from ESA
